Altronix eBridge200WPM Przewodnik Instalacji Pobierz pdf

eBridge200WPM/WPMH - 1 -

PLUS

Installation Guide

Rev. 081214

I.T.E. 43KC

Overview:

These long range PoE Ethernet transceiver/media converters transmit data and power over Coax or CAT5 cable over

distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to

IP cameras is greatly simplified as well. Two PoE cameras/devices can be attached and supports PoE, PoE+ or a single

Hi-PoE (60W) device. The eBridge200WPM/WPMH offers built-in IP management which allows for remote camera reset,

monitoring and reporting via various IP protocols. No need to install remote AC mains power since these devices are simply

powered from the low voltage PoE midspan/endspan equipment, such as Altronix NetWay midspans or eBridge100SPR.

Note: Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 4).

Features:

Input Power Options and Switch Setting:

Receiver

Input

Power

CAT5 Wiring Configuration Switch Setting

Link

Distance

Midspan or Endspan 30W 2 pair 30W CAT or 60W COAX 100m

Pace1PRM, 4PRM, 8PRM or 16PRM 30W

Provided over 2 pair/

2 pair on CAT5e

30W CAT or 60W COAX 500m

Pace1PRD* 60W Provided over 4 pair on CAT5e 60W CAT 500m

eBridge100SPR** 60W ------- 30W CAT or 60W COAX 300m

eBridge100RM, 400RM 800RM or 1600RM 30W ------- 30W CAT or 60W COAX 300m

NetWay1D 60W Provided over 4 pair on CAT5e 60W CAT 100m

*When used with NetWay1D.

**Use with UL Listed Class 2 or limited power source (such as NetWay1D).

Input:

• UL Listed LPS PoE Power Supply. See input options

table below.

Power Output:

• 2 ports PoE/PoE+ (30W) per port or 1 port Hi-PoE (60W).

• Total output power: 60W.

Ethernet:

• Link Distance: 500m max. (with Pace or eBridge100

series PoE receivers to eBridge200WPM)

or 100m (with standard midspan or endspan to

eBridge200WPM).

• Connectivity: RJ45, auto-crossover.

• Wire type: 4-pair Cat-5 or better structured cable.

• Device Distance: 100m max.

(eBridge200WPM to camera/device).

• Speed: 100BaseT, full duplex, auto negotiation.

Coax:

• Link Distance: 300m max.

• Connectivity: BNC, RG-59/U or similar.

• Speed: 100BaseT, full duplex, auto negotiation.

LED Indicators:

• Speed and Activity of Output ports.

• PoE ON the Spare Pair of CAT5

PoE ON the Data Pair of CAT5.

Environmental:

• Operating Temperature:

60W over CAT5 -40ºF to 167ºF (-40ºC to +75ºC).

60W over Coax -40ºF to 149ºF (-40ºC to +65ºC).

45W over Coax -40ºF to 167ºF (-40ºC to +75ºC).

• Storage Temperature: -- 40ºF to 167ºF (--- 40ºC to +75ºC).

• Humidity: 20 to 85%, non-condensing.

Applications:

• Long range outdoor CAT5 or Coax PoE/PoE+/Hi-PoE.

• Retrofit digital IP cameras in an analog CCTV installation

(up to two (2) IP cameras expansion per analog camera).

• Works with Megapixel, HD720, HD1080 and VGA

(SD) cameras (see note, pg. 2).

• Upgrade deployed CCTV Coax to a digital network

in Retail, Hospitality, Arenas, Casinos, Airports,

Schools, Hospitals, Transportation, etc.

Mechanical:

• NEMA 4X, IP66 Rated enclosure for outdoor use.

• Dimensions (H x W x D approx.):

9.5” x 7.32” x 4.92” (241.3mm x 185.9mm x 125mm).

Models:

eBridge200WPM: Outdoor Managed Two Port

Transceiver.

eBridge200WPMH: Outdoor Managed Two Port

Transceiver, enclosure with three (3) 5/8” wiring inlets,

includes NEMA rated glands.

eBridge200WPM - Outdoor Managed Two Port Transceiver

1 2 3 4 5 6 ... 11 12

Podsumowanie treści

Strona 1 - Installation Guide

eBridge200WPM/WPMH - 1 -PLUSInstallation GuideRev. 081214I.T.E. 43KCOverview:These long range PoE Ethernet transceiver/media converters transmit d

Strona 2 - Suggested area

- 10 - eBridge200WPM/WPMHPole Installation Using Optional Pole Mount Kit PMK1 (not included):This installation should be made by qualified service p

Strona 3 - EoC Receiver

eBridge200WPM/WPMH - 11 -Wall Mount Installation:7.32”185.9mm1.38”35.1mm1.5”38mm1.5”38mm1.5”38mm3.54”89.9mm8.0”203.2mm6.27”159.3mm10-32 X 0.25” (6.

Strona 4 - 15W Coax Applications:

- 12 - eBridge200WPM/WPMHAltronix is not responsible for any typographical errors.140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax:

Strona 5 - 15W Cat5e Application:

- 2 - eBridge200WPM/WPMH Installation Instructions:Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and wit

Strona 6

eBridge200WPM/WPMH - 3 -Technical Specifications:Parameter DescriptionConnections BNC for Coax link. RJ45 for ethernet link.Input powerrequirements

Strona 7 - eBridge200WPM/WPMH - 7

- 4 - eBridge200WPM/WPMHFig. 515W Coax Applications:Fig. 660W Cat5e Application:Fig. 7 - Data/Power Transmission from Headend up to 500m over Cat5e

Strona 8 - Additional Information:

eBridge200WPM/WPMH - 5 -Fig. 8 - Data/Power Transmission from Headend up to 100m over Cat5e30W Cat5e Application:Fig. 9 - Data/PowerTransmission fr

Strona 9 - eBridge200WPM/WPMH - 9

- 6 - eBridge200WPM/WPMH15W Cat5e Application:Fig. 12 - Data/Power Transmission from Headend up to 100m over Cat5eCable Type, Total Device Power, D

Strona 10 - - 10 - eBridge200WPM/WPMH

eBridge200WPM/WPMH - 7 - b. Right click the Local Area Connection icon, and then click Properties. Administrator permission required. If yo

Strona 11 - Wall Mount Installation:

- 8 - eBridge200WPM/WPMHFig. 14 - SETUP MENU - Setup Site ID,Date and TIme Disable/Enable PortsFig. 15 - STATUS MENU - Real time unit statusNetwork

Strona 12 - (H x W x D approx.):

eBridge200WPM/WPMH - 9 -2. If using a Static IP (recommended), you will need to input the information manually. In order for DDNS to work, you mu

Komentarze do niniejszej Instrukcji

Brak uwag

Altronix eBridge200WPM Przewodnik Instalacji

Przeglądaj online lub pobierz Przewodnik Instalacji dla Akcesoria do kamer ochrony Altronix eBridge200WPM. Altronix eBridge200WPM Installation guide Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji