Altronix R2416ULCB Installation Instructions Instrukcja Użytkownika Pobierz pdf (Strona 2)

- 2 - R2416ULseries

Overview:

These Altronix Rack Mount CCTV Power Supplies provide 24VAC or 28VAC distributed via sixteen (16) fuse or

PTC protected outputs for powering CCTV Cameras, heaters and other video accessories.

Sixteen (16) Output Rack Mount Configuration Reference Chart:

Altronix

Model Number

Output Voltage

(VAC)

Total Output Current

(Power)

Number of Outputs

PTC Protected Outputs

(Class 2 power-limited

for Dry locations).

(Class 3 for Wet

locations).

Fuse Protected

Class 1 Outputs

Individual Output

Current (max per output

not to exceed total

output current)

Fuse Ratings

Primary In-line

Fuse Ratings

115VAC 50/60Hz Input

Current

Agency

Listings

R2416UL

24VAC 7 amp

16 Yes 3.5 amp

3.5

amp

3.5 amp/

250V

2.9 amp

28VAC 6 amp

R2416ULCB

24VAC 7 amp

16 Yes 2.5 amp

3.5 amp/

250V

2.9 amp

28VAC 6 amp

R2416300UL

24VAC 12.5 amp

16 Yes 3.5 amp

3.5

amp

3 amp

28VAC 10 amp

R2416300ULCB

24VAC 12.5 amp

16 Yes 2.5 amp 3 amp

28VAC 10 amp

R2416600UL*

24VAC 25 amp

16 Yes 3.5 amp

3.5

amp

6 amp

28VAC 20 amp

R2416600ULCB

24VAC 25 amp

16 Yes 2.5 amp 6 amp

28VAC 20 amp

*24VAC models: Outputs 1-8 provide 12.5 amp (300VA) max. Outputs 9-16 provide 12.5 amp (300VA) max.

*28VAC models: Outputs 1-8 provide 10 amp (280VA) max. Outputs 9-16 provide 10 amp (280VA) max.

Specifications:

Installation Instructions:

1. Mount unit in the desired rack location (Space unit at least 3” from any video monitors). Do not obstruct side air vents.

2. Set power disconnect circuit breaker to OFF position (Fig. 1d, pg. 3).

3. The unit is factory set for 24VAC operation.

For 28VAC operation, adjust unit prior to mounting and applying power as follows:

a. Open bottom of the unit by removing six (6) screws (Rack Mechanical Drawing & Dimensions, pg. 4).

b. For 28VAC operation, adjust unit prior to mounting and applying power as follows:

Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and

the yellow wire [24V] is connected to the terminal marked [S].

c. After securing all wires for proper voltage place bottom panel back on the unit and fasten with the six (6) screws.

Note: R2416ULCB set for 28VAC operation is not Class 2 Rated, not power-limited.

Agency Listings:

• ULListedforCommercialCCTVEquipment(UL2044).

 CULListed-CSAStandardC22.2No.1-98,Audio,

 VideoandSimilarEquipment.

• CEEuropeanConformity

Output:

• 24VACor28VACoutputs(Factoryset@24VAC).

• Surgesuppression.

• Filteredandelectronicallyregulatedoutput.

• Shortcircuitandthermaloverloadprotection.

Visual Indicators:

• Sixteen(16)individualpowerLEDindicators.

• Illuminatedpowerdisconnectcircuitbreaker

with manual reset.

Features:

• Unitmaintainscamerasynchronization.

• Easeofinstallationsavestimeandeliminatescostlylabor.

•Removableterminalblockswithlockingscrewflanges.

Rack Dimensions (H x W x D):

• 2UrackmountchassisforuseinstandardEIA19”rack.

3.26” x 19.125” x 8.5” (83mm x 486mm x 216mm)

1 2 3 4

Komentarze do niniejszej Instrukcji

Brak uwag

Altronix R2416ULCB Installation Instructions Instrukcja Użytkownika Strona 2

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria elektryczne Altronix R2416ULCB Installation Instructions