Altronix NetWay1EV Installation Instructions Instrukcja Użytkownika Pobierz pdf (Strona 2)

- 2 - NetWay1/NetWay1EV

Technical Specifications:

Parameter Description

No. of Ports One (1)

Input power requirements NetWay1E - 115VAC, 60Hz, 1.5 amp.

NetWay1EV - 230VAC, 50/60Hz, 0.8 amp.

Indicators Port Status and power LED

PoE Shutdown Voltage

and Current Range

5VDCto24VDCor12VACto24VAC.Maximumcurrent:2mAfor5VDC

Maximumcurrentforhighervoltages:10mA.

Environmental

Conditions

OperatingAmbientTemperature:85W-4ºFto120ºF(-20ºCto49ºC).

55W-4ºFto131ºF(-20ºCto55ºC).

Relativehumidity:85%,+/---5%

StorageTemperature:---4ºto158ºF(---20ºto70ºC)Storage

OperatingAltitude:--- 1000 ft. to 2,000 ft. (--- 304.8m to 609.6m).

Regulatory Compliance

UL/CUL Listed for Information Technology Equipment (UL 60950-1).

CE approved.

Structured

Cable from

Network Switch

12VAC to 24VAC or

5VDC to 24VDC input

for Remote Manual

PoE Shutdown

Structured

Cable to

IP Camera

--- +

PoE

ShutdownINOUT

PoE

Fig. 1

Altronix is not responsible for any typographical errors.

14058thStreet,Brooklyn,NewYork11220USA,718-567-8181,fax:718-567-9056

website:www.altronix.com,e-mail:[email protected],LifetimeWarranty,MadeinU.S.A.

IINetWay1E/NetWay1EVRev.011612     D26M

MEMBER

Wall Mount Installation

1- Install mounting brackets (A) on the left and right side of rack chassis using

four (4) flat head screws (B) (included) (Fig. 2a).

2- Place unit at desired location and secure with mounting screws

(not included) (Fig. 2b).

Caution: It is necessary to make sure mounting screws

are securely fastened to a beam when installing the

unit vertically.

Fig. 2a

Fig. 2b

1 2

Komentarze do niniejszej Instrukcji

Brak uwag

Altronix NetWay1EV Installation Instructions Instrukcja Użytkownika Strona 2

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria elektryczne Altronix NetWay1EV Installation Instructions