Altronix eBridge4SPT Installation Instructions Instrukcja Użytkownika Pobierz pdf (Strona 4)

- 4 - eBridge4SK

Configuring eBridge4SPT for network connection:

Since every Network Configuration is different, please check with your Network Administrator to see if your

eBridge4SPTshouldusestaticIPaddresses,orDHCPassignedIPaddressesand/anInboundPortassignmentprior

to setting up network connection.

1. Click Network Settings link.

If you are prompted for an administrative password, type and submit the password.

Note:Defaultsettingshavepasswordrequirementsturnedoff.

2. NetworkSetuppagewillbedisplayed.YoumaynowconfigureyoureBridge4SPT for network

connection.

FigureX-XisascreenshotoftheNETWORKSETTINGMENU.ThismenuisforconfiguringtheeBridge4SPT units for

a network connection.

FigureX-XNetworkMenu–LAN

Network Type:

Static IP

User can set a fixed IP for network connection.

DHCP

DHCPserverinLANwillautomaticallyanassignIPconfigurationforthenetworkconnection.

This field shows the eBridge4SPT current IP Address. A static IP address must be set manually.

IfDHCPthisvaluewillbeassignedautomatically.

Subnet Mask

This field shows the subnet mask for your network so the eBridge4SPT will be recognized within the

network.IfDHCPisselected,thisvaluewillbeassignedautomatically.

Inbound Port

Port number for HTTP/WEB communication.

Host Name

Name of the eBridge4SPT device on the LAN

Additional Information:

1. IfusingDHCP,allsettingswillbedetectedautomatically.

 WhileDHCPisausefultoolfordeterminingthenetworksettings,ifyousetupyoureBridge4SPT in this manner

its IP address may change at different times for different reasons, particularly after a power failure. If the IP address

of the eBridge4SPT changes, you may have difficulties accessing your eBridge4SPT locally and/or remotely.

 ItisstronglyrecommendedthatyouconnectviahostnamewhenunitsconfiguredasDHCP.

 PleasedonotsettheDHCPaddressissuedtotheeBridge4SPT by the router as its static IP address unless you

take specific steps that program your router to prevent such address conflicts.

2. IfusingaStaticIP(recommended),youwillneedtoinputtheinformationmanually.InorderforDDNStowork,

you must enter valid data, compatible with your network, for all of the network setting fields: IP address,

Subnet Mask, Inbound Port and Host Name.

3. If you are connecting through a router, make sure that you have ‘opened up’ all the required network ports in the port

forwarding section of your router’s setup options. That is, you have directed the router to send any incoming traffic

using those IP ports to the LAN IP address of the eBridge4SPT. Useful information about router port

 forwardingcanbefoundatwww.portforward.com.Differentroutersmayusedifferenttermsforportforwarding

 function.Forinstance,D-Linkcallsitvirtualserver,Netopiacallsitpinholes.

The default port for eBridge4SPT is: 80

Note: Port 80 is the default port used for web browsing. Because of this, in order to prevent the average user from

 hostingawebserver,mostISPsBLOCKtrafficusingport80fromreachingtheaveragesite.Ifyouonlyplanto

monitor your eBridge4SPT on a LAN, you can use port 80, and don’t have to concern yourself with routers.

However, if you desire remote access to your eBridge4SPT, you MUST select functional ports and set up the

port forwarding in your router. Other ports, such as 8080 and 8000 are sometimes blocked by ISPs as well.

What port(s) should be used? There are 65,535 valid IP ports to choose from.

1 2 3 4 5 6 7 8

Komentarze do niniejszej Instrukcji

Brak uwag

Altronix eBridge4SPT Installation Instructions Instrukcja Użytkownika Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria elektryczne Altronix eBridge4SPT Installation Instructions